Skip to main content
Toybox Labs Help Center home page Toybox Labs
Submit a request Sign in

Search

  1. Toybox Labs
  2. Troubleshooting
  3. Comet Troubleshooting

My Comet nozzle is digging into the print bed

Crash
Crash
  • Updated December 24, 2024 00:27

If the nozzle is too low, try calibrating the printer up using these instructions here.

If you need any help calibrating, please let us know at support@toybox.com!

 

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Related articles

  • How to Calibrate your Comet
  • Putting tape on your Comet print bed
  • Food won't catch in Comet nozzle/something is stuck inside the nozzle
  • The nozzle is scraping into the print bed
  • My prints are a blobby, stringy mess.

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

  • My x axis on my Comet is squeaking
  • Food won't catch in Comet nozzle/something is stuck inside the nozzle
  • My Comet isn't turning on
  • My prints aren't sticking on my Comet print bed
  • My Comet nozzle is digging into the print bed
  • Putting tape on your Comet print bed
  • WiFi Password says "incorrect" for my Comet
  • The screen is all white, nothing is showing up
  • The screen says "bed mapping error"
  • The screen says "heater failed" or "extruder cable not plugged in"

See all 11 articles

Dansk (Danmark) Deutsch (Österreich) Deutsch (Schweiz) Deutsch (Deutschland) Ελληνικά (Ελλάδα) Español (España) Español (México) suomi (Suomi) Français (Belgique) Français (France) Íslenska (Ísland) Italiano (Italia) Nederlands (Nederland) Norsk Polski (Polska) Português (Portugal) Svenska (Sverige)
Zendesk Theme by Zenplates
Powered by Zendesk