Crash
Articles
Recent activity by Crash
-
My prints have gaps between layers
Do the layers in your prints appear to be missing, flimsy or too thin like in the pictures below? If yes, then your printer is likely under-extruding. If a printer is under-extruding, it means ...
- Updated
- 8 followers
- 0 comments
- 0 votes
-
My prints are shifting
Are your prints shifting like in the photos below? If yes, this is most likely because something is preventing the motors on the XY plane to correctly move. Usually this means there is some type...
- Updated
- 16 followers
- 3 comments
- -19 votes
-
My Toybox LCD screen is stuck on "Loading...this may take a minute" / "Not connected"
If your screen says "loading...this may take a second" and/or "not connected" try the following steps and then try connecting again: Try to set up using a different device (phone, tablet, computer...
- Updated
- 6 followers
- 0 comments
- -6 votes
-
What is cura and what happens if I choose not to use it?
Cura is what is known as a slicer. It takes your toy design and turns it into commands that your printer can understand. This will typically happen inside your browser and then it will beam the res...
- Updated
- 3 followers
- 0 comments
- 2 votes
-
How can I adjust the print belt?
To adjust your print belt, you can click here to follow a short instructional video. If you need any assistance at all, please reach out to us at support@toybox.com and we'd be more than happy to h...
- Updated
- 6 followers
- 0 comments
- -8 votes
-
Why does my model need support?
3D printing is a very powerful tool that can let you print some amazing things, but it has one big limitation: they can only build from the bottom up. This means that sometimes you need to add easi...
- Updated
- 2 followers
- 0 comments
- 2 votes
-
How do I factory reset my printer?
Click here for a guided instruction video, or follow the directions below. Unplug your Toybox from behind the printer and plug it back in. While the screen is either blinking (newer models) or boo...
- Updated
- 7 followers
- 3 comments
- 1 vote
-
My toy is “not manifold." What does that mean?
Manifold is a 3D design term that describes whether your model is an object that could be recreated in the real world. If it's not manifold, that most often means that there is a hole in your model...
- Updated
- 3 followers
- 0 comments
- 0 votes
-
How do I do a security fix?
If your printer didn't have an issue connecting to a network previously, but is now having connection issues, you may have to do a security fix. Follow the instructions below or click here for vide...
- Updated
- 2 followers
- 0 comments
- -2 votes
-
Can I add lubricant to my printer?
Any friction around the extruder can cause your prints to shift slightly. If you're experiencing this issue with your printer, you can try adding lubricant on the top and sides of the plastic beam ...
- Updated
- 6 followers
- 0 comments
- -1 votes